Michigan State University Extension
Preserving Food Safely - 01600735
10/13/97

CANNING EQUIPMENT-PROBLEMS



Sometimes, a lid on the pressure canner will become
"stuck" if the lid is not removed when the pressure has
reached zero. NEVER try to hurry the cooling of any canner
or force it open by pouring cold water over it. This shock
treatment could cause the seals to loosen, the liquid to
siphon off, or the jars to break. Reheating the canner and
letting it return once again to zero pressure should release
the vacuum.


Other methods that are recommended:


Using a rubber mallet, gently tap around the rim.
Then, exert equal downward pressure when turning the cover.
Never use a regular hammer. If the canner lid is stubborn
due to a sticky sealing ring, it's time to replace the
gasket. Rings are prelubricated before packaging and only
need oiling occasionally. Oiling the gasket too frequently
can cause swelling, rapid deterioration, and even more
problems.


Go To Top of File &&&&&& MSU Extension Home Page &&&&&& Main Page for this Data Base

This information is for educational purposes only. References to commercial products or trade names does not imply endorsement by MSU Extension or bias against those not mentioned. This information becomes public property upon publication and may be printed verbatim with credit to MSU Extension. Reprinting cannot be used to endorse or advertise a commercial product or company. This file was generated from data base 01 on 03/09/98. Data base 01 was last revised on 10/13/97. For more information about this data base or its contents please contact wrublec@msue.msu.edu . Please read our disclaimer for important information about using our site.