Magazine    GrowFAQ    StrainGuide    Forums    Pictures    Tools    myOvergrow

Forum Quickjump:
-------------------- Private Messages User Control
Panel Search Forums Forum Home -------------------- Site
Happenings--
Announcements-- Overgrow
SponsorsCultivation-- Basic Growing Information--
General Indoor Growing----
Hydroponics---- Organic
Foods-- General Outdoor
Growing-- Sick Plants &
Problems-- Step-by-Step
Tutorials---- Add Your
Tutorial-- Growroom Design &
Setup---- Lighting and
Ventilation-- Adv Tech &
Experiments-- Strains &
Hybridization---- Breeders
Lab-- Hashish &
ProcessingPhotography-- Plants & Budshots----
Growroom Pictorials---- Outdoor &
Greenhouses-- General Photo
GalleryInternational
ForumsLifestyle-- Smoker's Lounge----
Introduce Yourself---- Political Debate
& War---- High
Entertainment---- Stoner
Rambling---- Special Interest
Groups-- mota20's Medical
Club-- Activist Corner-- Security & LegalCommunity Development-- Growing
Consensus-- GrowFAQ
Contributions-- StrainGuide
Improvements-- Suggestions &
FeedbackSewage-- Recycle
Bin

SHOP SponsorsBongsAds

Home  |
Glossary of
Terms  |   Recent
FAQs  |   Highest
Rated  |   Credits  |
FAQMap  |
Contact Us

search for  in the  GrowFAQsGlossaryStrainGuideEdge ForumsMember List

advanced
search

GrowFAQ : Cloning

How can I root quicker using cutting
scarification?

Added by:
MarvinM92  Last edited by:
snoofer  Viewed: 975 times

Rated by 17 users:
9.41/10

Contributed by: Leaf

Submitted: 02-10-2003

Introduction:

The idea here is to scarify the stem of
your cutting so that there is more area in which the
cutting can have the opportunity to grow roots and
therefore hopefully increase your rooting success rate.
You will need a sharp razor blade and a flat surface to
scarify your stem.

Scarification
Procedure:

The first thing you do is cut
your clone at a 45-degree angle; this will expose both
the inner and outer area of the stem. Now lay your
cutting on a flat surface. Visualize about an inch from
the cut end and place your razor blade at this point.

Gently, and with the slightest pressure, push
the blade to the end removing a fine outer layer of the
stem. Don't be in a hurry - there is no going back.
Gently scrape the stem with your blade until you can
clearly see the internal tissue layers. You have just
successfully scarified your cutting.

Cloning:

Now it is back to the regular cloning methods.
Dip into your cloning gel or powder and place into rock
wool, soil, water, peat pellet, or aero cloner. When
dipping your stems into your preferred cloning solution,
you will want to ensure that you get the very tip
(remember the 45-degree angle cut) and the length, which
you have scarred. I have used cloning powder for
demonstration purposes so you can easily see where I
have applied the powder to the cutting.

Rooting:

This last image shows a
successfully rooted clone that has used this simple
scarification method. As you can see there are roots
that have emerged from the full length of the scarring
and not just from the bottom. This will give your newly
rooted plant a much better survival and initial growth
rate.

This method is also very useful for hard to clone
cuttings and woody cuts which do not take to rooting
easily. It is also a good method to practice at all
times and in general it greatly increases rooting
success and shortens rooting time. Other tips that one
can use for those stubborn cuttings are to cut the
bottom of your stem into quadrants to expose more
surface area. One could also scarify two or three sides
of the stem as opposed to the one side illustrated here
to really give an advantage to those stubborn cuttings
that will just not take. Just remember when scarifying
more than one surface it becomes crucial that removing
too much material off any one surface will ensure
failure.

Some plants which generally take around
8 to 10 days to root, once applying this method, it is
not uncommon to have roots after 5 or 6 days.

One last tip, I like to soak my new cuts in a
glass of cool tap water for 15-20 minutes before
preparing them to root. The chlorine in the water will
kill any bacteria present and the cool oxygen filled
water will be absorbed by the plant, giving it lots of
reserve strength to push out those roots.

Good
luck and happy rooting!

Last modified: 22:29 - Apr 06,
2003

Login to
Rate this
FAQ

Quicklink:  http://overgrow.com/growfaq/1474

Overgrow phpFAQ v1.2 © 2000-2003
~shabang~ All Rights Reserved
faq:1474 "How can I root quicker using cutting
scarification?"